T his will be the finished look on the project. You will need to cut your card stock to 8 1/4" X 10 3/4" with your trimmer and you will need two pieces of the (DSP) Designer series paper cut at 4 3/4" X 8" and a matching piece of card stock cut at 2"X 11". On your card stock you will need to score this on the long side of the 10 3/4" of 5 1/4 and 5 1/2. you will also need to round your corners with the detailed trio punch.
In this pic you will see how I removed the original label on the front of the note pad and added some of the matching DSP to it by gluing it down with some multipurpose glue. I also show that you will wrap your matching card stock cut at 2" X 11" around the back of the notepad and glue it together and place it to the inside of the card stock with the same glue and you will be able to pull the note pad in out of that ban. So when it comes to replacing the old one with a new one.